Full Radius Calculator

To proceed, please enter the required information.

Step 1: Enter "Surface Feet Per Minute (SFM)"
SFM

Step 2: Enter "Diameter (DIA)"
Diameter in inches - Range: 0-1000 Inches

Step 3: Enter the "Inches Per Tooth (IPT)"
Inches Per Tooth in inches - Range: 0-1 Inch

Step 4: Enter the "Depth of Cut (DOC)"
DOC in inches - Range: 0-10 Inches

Step 5: Enter the "Effective Flutes"
Effective Flutes

Step 6: Done!
Press Calculate Now!!! button and see the results below

Results!
Radius Chip Thinning Factor (RCTF)	Actual Feed Per Flute
True Cutter Diameter
Revolutions Minute (RPM)	Inches Per Minute (IPM)